metal tube and sheet fiber laser cutter 3015 2040 1560 2060 with exchange table
Product Parameters
| Model |
UN-3015BC |
| Panel Work Area |
3000*1500 mm |
| Tube cutting lenght |
6 /9/12 m |
| Fiber Laser Source |
Raycus/MAX |
| Laser Power |
2000W/3000W/6000W |
| Max Moving Speed |
120 m/min |
| Max Acceleration |
1.5G |
| Positional Accuracy |
± 0.02 mm |
| Control System |
CYPCUT/RAYTOOLS |
| Motor and Driver |
Taiwan Delta ;Japan Fuji/Yaskawa |
| Reducer |
Japan SHIMPO reducer |
| Transmission |
Rack and pinion |
| Pneumatic Accessories |
Japan SMC |
| Table |
Blade table |
| Supported Graphic Formats |
NC PLT, DXF, BMP, AI, DST, DWG, etc |
| Work Voltage |
3 phase 380V/50HZ |
| Warranty |
2 years |
| Water Chiller |
S&A /Hanli |
Detailed Photos
Laser source
Raycus Laser is the first listed laser manufacturer in China. The brand's lasers have a long service life and are suitable for long-term production needs.Rayco uses imported chips to ensure the stability of laser output and ensure the precision and quality of machine cutting.
Laser head
Raytool laser head accessories universal, can save later use and maintenance costs. Raytool laser head focus tracking system accuracy up to 1mm, cutting more accurate.Raytool laser cutting head has temperature monitoring function, if the laser head temperature is too high, it will automatically alarm, which can effectively protect the optical path system
Water chiller
The S&A water chiller is equipped with a two-channel water cooling system, which can cool the laser and optical components simultaneously. The S&A water chiller has excellent cooling performance and advanced temperature control technology, which can achieve ultra-high precision temperature control of ±1ºC.The operation of the S&A water chiller is very simple and convenient. Its cooling temperature is easy to adjust and control, and users can easily set it according to their needs.
Body structure
Bed with welded structure, the whole through high temperature, spray treatment, more solid and durable. The bed is also subjected to vibration failure treatment, and the dynamic response ability is excellent.
Pipe cutting section
Traditional pipe cutting is done manually, so each section is different, while laser processing uses the same fixture system to complete multi-step processing at one time with high precision.
Motor And Driver
Taiwan Delta servo motor has good overload resistance and can withstand three times the load of rated torque. The motor runs smoothly and does not lose step, which is very suitable for the needs of engraving machines.
Reducer
Japan SHIMPO reducer adopts planetary deceleration mechanism, small vibration, low noise. And the new treasure reducer can be adapted to the servo motor of various brands, which can maximize the performance of the servo motor.
Control System
According to customer feedback, the CYPCUT system is very good to use. It is simple to operate, rich in functions, and can cut materials well. And the system is relatively inexpensive, which can reduce costs.
Exchange Table
It can carry out the blanking and feeding work at the same time, which greatly saves the standby time and improves the work efficiencyIt can carry out the blanking and feeding work at the same time, which greatly saves the standby time and improves the work efficiency.
Product Description
Introduction of tube & sheet fiber laser cutter
The plate and tube integrated machine has a stable and efficient performance in cutting pipes and plates, fully realizes the multi-purpose of the machine, meets the needs of customers for both cutting plates and cutting pipes, and has been favored by many consumers.
Application of sheet metal and tube cutting machine
1. Construction field
Plate and tube integrated machine can process all kinds of plates and tubes required for building templates, steel structures, curtain walls and other equipment.
2. Ship field
Plate and tube integrated machine can manufacture deck, hull and other components.
3. Automotive sector
The all-in-one machine can be used to manufacture automotive engines, car body structures, car seats and other components.
4. Furniture industry
Plate and tube integrated engraving machine can be used to make refrigerators, stair handrails, tableware, beds, tables and chairs and other furniture.
Advantages of tube & sheet fiber laser cutter
- High precision. In the cutting process, the plate and tube integrated machine can automatically adjust the cutting angle and speed to ensure the accuracy of cutting.
- High efficiency. Plate and tube integrated machine adopts laser cutting, laser intensity is high, and can complete the cutting task in a short time. And the cutting surface of laser cutting is smooth, without re-processing and polishing.
- Low maintenance cost. The use of fiber laser generator, no reflector, can save a lot of maintenance costs
- Little pollution. The board and tube machine does not need to use chemical agents and other harmful substances in the cutting process, green environmental protection, small pollution to the environment, and will not cause harm to the employee's body.
Features of metal plate and tube laser cutting machine
- Plate and tube integrated machine has the function of plate cutting machine and pipe cutting machine, which can cut a wider range and cut more materials.
- A machine has two functions of cutting plate and cutting pipe, which can effectively save the early equipment investment cost.
- Plate and tube integrated machine is simple to operate, with double control system, can distinguish between pipe cutting and plate cutting, cutting speed is fast.
- The pipe cutting part uses double chuck clamping, which can cut a variety of irregular pipes.
Samples
Company Profile
Company
Our company is a professional research and manufacturing fiber laser cutting machine enterprises. Our laser beam quality is good, cutting accuracy is high, performance is stable, cost-effective. We have a number of patented technologies, leading in China. Our products sell well all over the world and enjoy a good reputation.
Services
1. The warranty period is two years, the main parts are replaced free of charge during the warranty period, except for consumable parts.
2. The whole machine is maintained free of charge.
3. 24-hour online customer service, any questions can be answered at any time.
4. Provide free installation tutorials.
5. Can provide on-site maintenance services and online guidance maintenance services.
Customer Visiting
We have been researching and manufacturing fiber laser cutting machines for more than ten years and we have customers from all over the world. Our factory also welcomed many customers to visit. Many customers come to our factory for field visits and have established good cooperative relations with us. If you have time, you can visit our factory at any time. We believe your trip will be worthwhile.If you are not able to come to China in person, we can provide videos that you can visit online.
Certifications
FAQ
Q1: Engraving machine use precautions
A1: Confirm whether the cooling system is working properly before starting work;
When the engraving machine is working, do not touch the spindle with your hand;
Clean the table frequently to ensure the normal operation of the machine;
Perform regular maintenance on the machine.
Q2: What Are the Optional Accessories for Metal pipe cutter ?
A2: It is mainly contain air compressor, pressurizer , also can choose up and down loading device (for Automatic feeding saves labor and time).
Q3: Which payment way your company can accept?
A3 : 1. 30% T/T in advance payment , 70% T/T balance payment before shipping machine .
2.100% L/C at sight
3.30% T/T deposit payment ,70% see copy bill of loading
Q4: How to solve it if there is some problem or parts broken during operating metal tube laser cutting machine
A4: If machine technical problem , we have engineer online support service , through remote control , video show , to help solve problem , if parts broken ( not consumption parts ,we will take place a new one as soon as possible.
Q5:Why do you need to re-calibrate when changing to different cutting materials and different types of nozzles? What should you do if the automatic calibration is unsuccessful?
A5: The height is monitored using a capacitive sensor, which is affected by the material, the contact surface area, and the distance between the sensor and the material.
Different nozzles have different contact areas, so changing nozzle types requires re-calibration.
If the automatic calibration fails, execute the M70 command in MDI mode for manual calibration, or switch to manual calibration.
Audited Supplier 
){kind=link}